{
 "schema_version": 1,
 "generated": "2026-10-24",
 "id": "goroman-vibewatch--build-and-pair-vibe-watch",
 "repo": "GOROman/vibewatch",
 "repo_url": "https://github.com/GOROman/vibewatch",
 "repo_slug": "goroman-vibewatch",
 "title": "Build Vibe Watch firmware and pair it with a Mac",
 "page_title": "How to build Vibe Watch firmware and pair it with a Mac with Vibewatch",
 "summary": "Compile the open-source firmware for the StopWatch, flash it, and pair the device over Bluetooth to your Mac.",
 "who": "A developer with an M5Stack StopWatch who wants to start using Vibe Watch with their AI coding host on macOS.",
 "problem": "The StopWatch ships without this firmware, so it cannot act as an AI coding controller until it is built, flashed, and paired.",
 "outcome": "The StopWatch runs Vibe Watch firmware and appears as a paired Bluetooth device named Vibe Watch with a slot number.",
 "steps": [
  "Install PlatformIO Core by following the official installation guide linked in the README.",
  "Run `git clone https://github.com/GOROman/vibewatch.git` and then `cd vibewatch`.",
  "Run `python3 -m platformio run -e m5stack-stopwatch` to build the firmware.",
  "Connect the StopWatch by USB and run `python3 -m platformio run -e m5stack-stopwatch --target upload`.",
  "On the watch, open Settings, select one of the three device slots, tap PAIR, then connect to Vibe Watch #n from macOS Bluetooth settings."
 ],
 "agent_prompt": "Using the GOROman/vibewatch repo, run the PlatformIO build for the m5stack-stopwatch environment in <project folder> and report the final build status. Verify that the output ends with a success line and no errors before reporting.",
 "agents": [
  "any"
 ],
 "difficulty": "Intermediate",
 "time": "60 minutes",
 "basis": "readme",
 "caveat": "The README describes the setup only for macOS Bluetooth settings, so other operating systems are not covered by the documented pairing steps.",
 "category": "Software and DevOps",
 "tags": [
  "Software and DevOps"
 ],
 "lang": "c++",
 "requirements": [
  "M5Stack StopWatch",
  "A macOS computer with Bluetooth",
  "PlatformIO Core installed",
  "A USB connection between the StopWatch and the computer for upload"
 ],
 "risk": "none",
 "seen_in_the_wild": false,
 "mentioned_publicly": false,
 "risks": [],
 "best": true,
 "score": 1.0,
 "evidence": [],
 "url": "https://dedupedai.com/use-cases/goroman-vibewatch/build-and-pair-vibe-watch/",
 "md": "https://dedupedai.com/use-cases/goroman-vibewatch/build-and-pair-vibe-watch/index.md",
 "disclaimer": "Deduped lists open-source repositories that belong to other people. We do not own, maintain, audit, or vouch for any of them, and a repo appearing here is not an endorsement or a safety check. The use cases, steps, and prompts are written by AI and may be incomplete, outdated, or just wrong. Where a use case is marked \"Seen in the wild\", we link to public posts where someone described something similar, but we have not verified those posts and the use case itself is still our AI's own write-up. Use all of this at your own risk. Only run code, commands, or agents on systems and accounts you are authorized to use, and read the code and every command before you run it, especially anything that touches credentials, files, or the network. Nothing here is professional, security, legal, or financial advice. All trademarks and project names belong to their respective owners, and their use here does not imply affiliation. Content is provided as is, without warranties of any kind. Found a mistake, a safety problem, or something you want removed? Email hello@dedupedai.com and we will look at it promptly.",
 "api": "https://dedupedai.com/api/v1/usecases/goroman-vibewatch--build-and-pair-vibe-watch.json",
 "api_version": "v1"
}