# AI use cases for Open Edit (veedstudio/open-edit)

Repo: [veedstudio/open-edit](https://github.com/veedstudio/open-edit) | Use cases: 5 | Page: https://dedupedai.com/use-cases/veedstudio-open-edit/

Open Edit is an open-source command-line tool that lets people and AI agents create and edit videos, including subtitles, motion graphics, slides, and renders, powered by VEED.

This file holds every use case of this repo. Each one starts with a "## " heading and ends with its URL.

- Caption a video locally with WhisperX at no cost: https://dedupedai.com/use-cases/veedstudio-open-edit/caption-video-locally-with-whisperx/
- Send a finished edit to VEED's editor as a project: https://dedupedai.com/use-cases/veedstudio-open-edit/hand-finished-edit-to-veed-editor/
- Render an HTML motion graphic to a frame-exact video: https://dedupedai.com/use-cases/veedstudio-open-edit/render-html-motion-graphics-to-video/
- Cut dead air and keep existing captions in sync: https://dedupedai.com/use-cases/veedstudio-open-edit/cut-silences-and-keep-captions-in-sync/
- Mix narration, music, and effects into one finished video: https://dedupedai.com/use-cases/veedstudio-open-edit/mix-narration-music-and-effects-to-final-video/

## How to caption a video locally with WhisperX at no cost with Open Edit

Repo: [veedstudio/open-edit](https://github.com/veedstudio/open-edit) | Difficulty: Intermediate | Time: 45 minutes | Basis: From the README

Transcribe a video offline with WhisperX and get a transcript.json for captioning.

**Who it is for:** A solo creator or developer with a finished talking-head video who wants captions without paying a transcription service.

**The problem:** Captioning by hand is slow, and hosted transcription bills per use.

**The outcome:** A runs folder with a transcript.json for the video, produced locally.

### Steps

1. Run `npx @veedstudio/openedit-cli init` in an empty folder to set up the workspace. (inferred, check the README)
2. Run `npx @veedstudio/openedit-cli install-whisperx` to install the local provider.
3. Run `npx @veedstudio/openedit-cli transcribe --provider whisperx video.mp4` to transcribe the video.
4. Open the runs folder and check the transcript.json file for word timings.

### Prompt to paste into your agent

```text
In the Open Edit repo at veedstudio/open-edit, use the @veedstudio/openedit-cli commands to transcribe <video path> locally with the whisperx provider. Expect a transcript.json under runs/ for that video. Verify that the file contains word-level timestamps before you continue.
```

### Caveat

The README says WhisperX is installed into an isolated uv or pipx environment, so uv or pipx must be available on the machine first.

Disclaimer: Third-party repos we don't own or vouch for. AI-generated use cases can be wrong: review everything and run at your own risk. Full text: https://dedupedai.com/disclaimer/

URL: https://dedupedai.com/use-cases/veedstudio-open-edit/caption-video-locally-with-whisperx/

## How to send a finished edit to VEED's editor as a project with Open Edit

Repo: [veedstudio/open-edit](https://github.com/veedstudio/open-edit) | Difficulty: Intermediate | Time: 30 minutes | Basis: From the README

Turn a finished plan into a VEED project a person can edit further, then pull it back.

**Who it is for:** A video producer who has an edit planned by an agent and wants a human to refine it in VEED's editor.

**The problem:** Agent-made edits are hard to adjust by hand unless they open as editable items in a real editor.

**The outcome:** A VEED project with footage cuts, text, captions, and audio tracks as editor items, plus a path to pull the edited project back.

### Steps

1. Run `npx @veedstudio/openedit-cli login` and complete the browser sign-in.
2. Run `npx @veedstudio/openedit-cli veed-project --install-bookmark` to add the OpenEdit to VEED bookmark.
3. Run `npx @veedstudio/openedit-cli veed-project plan.json` with your plan file.
4. Click the "OpenEdit to VEED" bookmark on VEED to finish the handoff in your browser.
5. After editing in VEED, run `npx @veedstudio/openedit-cli veed-pull ~/Downloads/openedit-<name>.json --out <folder>` to pull the project back. (inferred, check the README)

### Prompt to paste into your agent

```text
Using the Open Edit repo at veedstudio/open-edit, run veed-project on <plan file> and then open the resulting VEED project. Expect the editor to show footage, text, captions, and audio as separate items. Verify that the project opens in VEED before you tell the user it is ready.
```

### Caveat

The README says the handoff uses your VEED login and spends no VEED credits, but the final step runs in your browser through a bookmark.

Risk, credentials: The login stores a VEED token locally and refreshes it automatically, so keep the machine and token store protected.

Disclaimer: Third-party repos we don't own or vouch for. AI-generated use cases can be wrong: review everything and run at your own risk. Full text: https://dedupedai.com/disclaimer/

URL: https://dedupedai.com/use-cases/veedstudio-open-edit/hand-finished-edit-to-veed-editor/

## How to render an HTML motion graphic to a frame-exact video with Open Edit

Repo: [veedstudio/open-edit](https://github.com/veedstudio/open-edit) | Difficulty: Intermediate | Time: 60 minutes | Basis: From the README

Turn an HTML page with animations into a silent H.264 video, frame by frame.

**Who it is for:** A designer or developer making a motion graphic, title card, or animated slide from HTML and CSS.

**The problem:** Browser animations often render unevenly when captured as video.

**The outcome:** A silent MP4 where each frame matches the page at that exact time, with a re-render option for one stretch.

### Steps

1. Write or save your animated page as page.html in the workspace.
2. Run `npx @veedstudio/openedit-cli render page.html --out out.mp4 --fps 30000/1001 --duration 12` to render the video.
3. If one section is wrong, run `npx @veedstudio/openedit-cli render page.html --out out.mp4 --from 4 --to 6` to re-render only that stretch.
4. Run `npx @veedstudio/openedit-cli mux-audio --video runs/<run>/out.mp4 --audio runs/<run>/audio/mix.m4a --out runs/<run>/final.mp4` only if you have a soundtrack to add. (inferred, check the README)

### Prompt to paste into your agent

```text
In the veedstudio/open-edit repo, render <page.html> to out.mp4 with the render command and a duration matching the page timing. Expect a silent MP4 that matches the animation timing. Verify that the output is not a single flat colour before you deliver it.
```

### Caveat

The README says the render tool fetches headless Chrome on first use, so the first run may take longer.

Disclaimer: Third-party repos we don't own or vouch for. AI-generated use cases can be wrong: review everything and run at your own risk. Full text: https://dedupedai.com/disclaimer/

URL: https://dedupedai.com/use-cases/veedstudio-open-edit/render-html-motion-graphics-to-video/

## How to cut dead air and keep existing captions in sync with Open Edit

Repo: [veedstudio/open-edit](https://github.com/veedstudio/open-edit) | Difficulty: Advanced | Time: 60 minutes | Basis: From the README

Find speech ranges, apply a cut list in one encode, and retime the transcript to match.

**Who it is for:** A podcaster or editor with a talking video that has long pauses and an existing transcript.

**The problem:** Cutting a video after captioning breaks the word timings unless they are moved to match.

**The outcome:** A cut MP4 with crossfaded joins and a retimed transcript that matches the cut without transcribing again.

### Steps

1. Run `npx @veedstudio/openedit-cli speech-probe --gap 250 --json` to measure where speech starts, stops, and pauses. (inferred, check the README)
2. Write the kept ranges into an edl.json file, using seconds for the ranges.
3. Run `npx @veedstudio/openedit-cli apply-edl --edl edl.json --out cut.mp4 --crossfade 40` to build the cut. (inferred, check the README)
4. Run `npx @veedstudio/openedit-cli retime-transcript --edl edl.json --out runs/cut/transcript.json` to move the timings onto the cut. (inferred, check the README)

### Prompt to paste into your agent

```text
In the veedstudio/open-edit repo, probe speech in <video path>, write an edl.json with the kept ranges, then run apply-edl and retime-transcript. Expect cut.mp4 and a retimed transcript under runs/cut. Verify that the retimed transcript timings fall inside the cut duration.
```

### Caveat

The README says the EDL is in seconds while --gap and --crossfade are in milliseconds, so check units before you run it.

Disclaimer: Third-party repos we don't own or vouch for. AI-generated use cases can be wrong: review everything and run at your own risk. Full text: https://dedupedai.com/disclaimer/

URL: https://dedupedai.com/use-cases/veedstudio-open-edit/cut-silences-and-keep-captions-in-sync/

## How to mix narration, music, and effects into one finished video with Open Edit

Repo: [veedstudio/open-edit](https://github.com/veedstudio/open-edit) | Difficulty: Intermediate | Time: 30 minutes | Basis: From the README

Build one loudness-levelled audio track from many pieces and mux it onto a render.

**Who it is for:** A content producer with separate narration, music, and sound effects who needs one finished file.

**The problem:** Balancing several audio pieces by hand is slow, and voices get buried under music.

**The outcome:** A final MP4 with a mixed audio track, with music ducked under the voice and levelled to -14 LUFS.

### Steps

1. Place the narration, music, and effects pieces in the run folder and set the mix spec for the run.
2. Run `npx @veedstudio/openedit-cli mix-audio runs/<run>` to build the mixed track. (inferred, check the README)
3. Run `npx @veedstudio/openedit-cli mux-audio --video runs/<run>/out.mp4 --audio runs/<run>/audio/mix.m4a --out runs/<run>/final.mp4` to combine the audio and video. (inferred, check the README)

### Prompt to paste into your agent

```text
In the veedstudio/open-edit repo, run mix-audio on the run folder <run>, then mux-audio onto the silent render. Expect final.mp4 with the mixed audio. Verify from the command output which loudness correction ran before you report success.
```

### Caveat

The README says mix-audio builds the track from the run's mix spec, so the spec must already describe the pieces before the command runs.

Disclaimer: Third-party repos we don't own or vouch for. AI-generated use cases can be wrong: review everything and run at your own risk. Full text: https://dedupedai.com/disclaimer/

URL: https://dedupedai.com/use-cases/veedstudio-open-edit/mix-narration-music-and-effects-to-final-video/